• product-bg
  • product-bg

Sethunya sa tšepe

Tlhaloso e Khutšoanyane:

Ho thunngoa ka tšepee entsoe ka tšepe ea khabone ka ho qhibiliha le ho etsa.E sebelisoa haholo joalo ka li-abrasives bakeng sa ho hloekisa, ho hlakisa, ho lokisa sefahleho le ho pening.Boholo ba eona bo fapaneng bo tla etsa qeto ea hore na ultiate e phethiloe holim'a sebaka sa mosebetsi se tla phatloha.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Steel-Shot
Sebopeho sa Lik'hemik'hale C 0.85-1.20%
Si 0.40-1.20%
Mn 0.60-1.20%
S ≤0.05%
P ≤0.05%
Ho thatafala HRC 40-50
Microstructure Homogeneous Tempered Martensite kapa Troostite
Botenya ≥ 7.2g/cm3
Foromo ea kantle Spherical
Likaroloana tse se nang letho <10%

Kabo ea boholo

Screen No. Intshi Boholo ba skrine S70 S110 S170 S230 S280 S330 S390 S460 S550 S660 S780 S930
6 0.132 3.35                       Tsohle lia feta
7 0.111 2.80                     Tsohle lia feta  
8 0.0937 2.36                   Tsohle lia feta   ≥90%
10 0.0787 2.00               Tsohle lia feta Tsohle lia feta   ≥85% ≥97%
12 0.0661 1.70             Tsohle lia feta ≤5%   ≥85% ≥97%  
14 0.0555 1.40           Tsohle lia feta ≤5%   ≥85% ≥97%    
16 0.0469 1.18         Tsohle lia feta ≤5%   ≥85% ≥97%      
18 0.0394 1.00       Tsohle lia feta ≤5%   ≥85% ≥96%        
20 0.0331 0.850     Tsohle lia feta ≤10%   ≥85% ≥96%          
25 0.0280 0.710     ≤10%   ≥85% ≥96%            
30 0.0232 0.600   Tsohle lia feta   ≥85% ≥96%              
35 0.0197 0.500   ≤10%   ≥97%                
40 0.0165 0.425 Tsohle Phasa   ≥85%                  
45 0.0138 0.355 ≤10%   ≥97%                  
50 0.0117 0.300   ≥80%                    
80 0.007 0.180 ≥80% ≥90%                    
120 0.0049 0.125 ≥90%                      
200 0.0029 0.075                        

Kopo

Blast cleaning: E ​​sebedisetsoa ho hloekisa seqhomane sa ho lahla, ho etsa die-casting, forging;ho tlosoa ha lehlabathe la ho lahla, poleiti ea tšepe, tšepe ea mofuta oa H, mohaho oa tšepe.
Ho tlosoa ha mafome: Ho tlosoa ha mafome ho lahla, ho forging, plate ea tšepe, mofuta oa H tšepe, sebopeho sa tšepe.
Shot peening: Shot peening of the gear, heat treatment parts.
Ho phatloha ha lehlabathe: Ho phatloha ha lehlabathe ha tšepe ea profil, boto ea sekepe, boto ea tšepe, thepa ea tšepe, sebopeho sa tšepe.
Phekolo ea pele: Phekolo ea pele ea bokaholimo, boto ea tšepe, tšepe ea profil, sebopeho sa tšepe, pele ho penta kapa ho roala.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona

    Lihlahisoa tse amanang

    • Copper cut wire

      Mohala o sehiloeng oa koporo

      Tech Data Tlhaloso ea Sehlahisoa sa Copper Cut Wire Shot Chemical Composition Cu: 58-99%, tse ling kaofela ke Zn Microhardness 110 ~ 300HV Tensile Intensity 200 ~ 500Mpa Durability 5000 Times Microstructure Deformed αorα+β Density 8.9 g/cm3 Bulk Density/cm3 Bulk Density/cm3 boholo: 1.0mm, 1.5mm, 2.0mm, 2.5mm joalo-joalo Molemo 1. Nako e telele ea bophelo 2. Less Less 3. G...

    • Zinc cut wire

      terata e sehiloeng ea zinki

      E entsoe ka terata ea zinki ea boemo bo holimo, e hlahisoang ka ho khaola terata ea zinki ka li-pellets, bolelele bo lekanang le bophara ba terata.Zinc Cut Wire e boetse e fumaneha ka mokhoa o hlophisitsoeng o sebelisoang e le mokhoa o tšoarellang halelele oa ho thunya zinki.Tsena li nepahetse bakeng sa ho senya le ho phethela li-die castings, hangata ka lisebelisoa tsa ho phatloha ha mabili.E fumaneha ka litefello tse loketseng, lihlahisoa tsa rona li fokotsa ho senyeha ha thepa ea ho phatloha ha ho bapisoa le li-abrasives tse ling tsa tšepe....

    • Glass beads

      Lifaha tsa khalase

      Molemo ■ e hloekileng le e boreleli, e sa utloiseng bohloko ho ea ka mokhoa o nepahetseng oa mosebetsi.■ matla a phahameng a mochine, boima, ho tenyetseha ■ e ka sebelisoa hape ka makhetlo a 'maloa, phello e tšoanang' me ha e robehe habonolo.■ junifomo boholo, ka mor'a ho qhomisa lehlabathe ho pota-pota sesebediswa ho boloka junifomo khanya e le hantle, ha ho bonolo ho tloha watermark na.■ bohloeki bo phahameng le boleng bo botle li kopana le maemo a machaba.■ thepa e tsitsitseng ea k'hemistri, eseng ho silafatsa met...

    • Stainless steel cut wire shot

      Stainless steel cut terata shot

      Stainless steel cut terata e sebelisoa haholo bakeng sa ho thunya/ho qhomisa moea ha mefuta e fapaneng ea litšepe tse se nang ferrous, lihlahisoa tsa tšepe e sa hloekang, likarolo tsa aluminium, lisebelisoa tsa hardware, lejoe la tlhaho, joalo-joalo, ho totobatsa 'mala oa tšepe le ho fumana boreleli, ntle le mafome. , matt finishing surface treatment effect.Ka thepa e tala ea tšepe ea boleng bo holimo, sethunya sa tšepe e sa hloekang se hlahisoa ka likaroloana tse ts'oanang le ho thatafala, tse tiisang bophelo ba eona bo bolelele le ts'ebeletso e ntle ...

    • Steel Grit

      Tšepe Grit

      Matla a teng: GP: HRC46-50 Lihlahisoa tse sa tsoa etsoa tse nang le angular, grit butle-butle e pota-potiloe e ntse e sebelisoa 'me e loketse ka ho khetheha bakeng sa phekolo ea pele ea letlalo la oxide.GL: HRC56-60 E thata ho feta grit ea tšepe ea GP, e boetse e lahleheloa ke likarolo tse bohale nakong ea ho thunngoa 'me e loketse ka ho khetheha lits'ebetsong tsa ho lokisa holim'a metsi.GH: HRC63-65 Ho thatafala ho phahameng, ho sala litšepe tse bohale nakong ea ts'ebetso, haholo-holo e sebelisetsoang lisebelisoa tsa ho phatloha ha moea o hatelitsoeng ...

    • Brown Fused Alumina

      Brown Fused Alumina

      Likarolo Alumina oxide abrasive e na le boima bo phahameng le angular e bohale, e sebelisoa haholo bakeng sa ho phatloha ho metsi le ho omella, ho theha profil e loketseng bakeng sa ho lokisa bokaholimo.Alumina oxide abrasive ke mohopolo o phatlohang mecha ea litaba ea abrasive bakeng sa ho lokisa bokaholimo e kopang ferrous mahala.Alumina oxide abrasive ke li-abrasives tse sebetsang hantle haholo tse nang le mahlakore a nchocho le boima bo phahameng.E ka sebelisoa hape 'me e ka sebelisoa mefuteng e fapaneng ea mochini o phatlohang....